|
 , Hit : 5848 |
|
|
||||
|
|||||
|
|
|
- File #1 : TorchButton_v2.3.cab(), Download : 269 |
|
잠금화면 관련어플 찾으러 갔다가 주워온 윈모용 손전등 어플입니다. 센스UI를 끄면, 손전등 어플이 사라지는데요, 대체용으로 좋은 것 같습니다. 일반모드, 밝은모드, 깜빡이모드, SOS모드 지원합니다. PTT모드도 있는데, 이건 뭔지 모르겠습니다. 밝은모드는 기기에 손상을 줄수 있으므로, 사용여부는 알아서 결정해라고 합니다. 다른 세밀한 설정은 레지스트리에서 하는 것 할 수 있는 것 같습니다만, 영어울렁증때문에..^^; 설정법 댓글로 알려주실꺼죠? 제작자의 글은 아래와 같습니다. ================================================================= .---------------------------------------------------------------------- | TorchButton, v2.3 }---------------------------------------------------------- | | Dropped your keys? Finding something behind the bench? Operating on a computer and | need to find that jumper on the mainboard? | | This is a simple application built for some HTC devices that have a hardware LED, | normally used to take pictures in the dark. However I found the LED to be perfect | to be used as a handy pocket flashlight. | | Usage: | When the program starts, the flashlight is turned on. It will keep the | light on for 60 seconds (configurable in registry). You can turn the light | off earlier by starting the program again. This applies to all modes of the | application. | | Modes: | TorchButton has 5 modes so far. Each one explained in short: | | Normal: Simply enable the flashlight until the application is started again or | the configurable timeout occurs (60 seconds by default). This mode | can be used for a prolonged period. I have only tested it up to 5 minutes | though. | | Bright: The Bright mode is exactly the same as the Normal mode, with the only | difference being that the LED is more bright. This mode is equal to the | short moment when you make a photo with flashlight on. Note that this mode | does stress the LED and should not be used for prolonged periods. On the | Touch Pro I have used this up to a minute without problems. This feature | may or may not be available on some devices. | | Blink: The Blink mode turns the LED on and off in specific intervals that you | can configure in the registry. An example of usage is the bike light. | | SOS: This is extensive mode that supports sending custom morse code. The text | to be sent via morse code signals can be configured in the registry. This | defaults to "sos ", thus the SOS name for this mode. NOTE that the flashlight | timeout does NOT interrupt a text. It checks if the timeout occurred when it | starts over again and quits when it reached the timeout. | | PTT: The Push-To-Talk/Torch mode. When you device has a key you can map to 'hold', | you can use this feature to keep the light on as long as the key is pressed. | The AT&T Fuze is one of those devices with a PTT button. | | Configuration settings: | All settings can be configured via the Registry. All values can be found under | the HKLM\Software\TorchButton\ key. An up-to-date list of configuration settings is | presented below. Note that they are case-sensitive. | | FlashlightTimeout (DWORD), default 60. In seconds. | Configures the timeout after which the application should automatically stop. This | timeout applies to all variants. | | blinkTimeOnInMs (DWORD), default 250. In milliseconds. | When using blink mode, determines how long the led should stay on. | | blinkTimeOffInMs (DWORD), default 250. In milliseconds. | When using blink mode, determines how long the led should stay off before turning | on again. | | BlinkUsesBrightMode (DWORD), default 0. | When set to 1, blink mode will make use of the bright mode. If bright mode is not | available for a certain device, it will fall back to normal mode. | | sosText (SZ), default "sos ". Textual. | When using SOS mode, determines the text to send with morse code. Supported | characters are a-z, 0-9, comma (,) and period (.). Any non-recognized characters | are simply ignored. A space character inserts a pause of 7 units. This text may be | up to 8KB. | | sosUnitTimeInMs (DWORD), default 100. In milliseconds. | When using SOS mode, this determines the unit time that serves as base for the | various timing. The unit time is the same as how long a "dot" should last. | | brightResetTimeInMs (DWORD), default 750. In milliseconds. | The bright mode uses a mechanism to keep the LED on the mode that is normally only | used when making a picture with flashlight. A safety in the driver prevents this | mode from being active too long. I've worked around it by quickly re-enabling the | bright LED. On some devices this reset time should be shorter. | NOTE: Set this to 100 when you have the Alltel Touch Pro. | | BrightModeTimeout (DWORD), default 10. In seconds. | A seperate timeout used for bright mode. As bright mode can cause the led(s) to heat | up a lot more than normal mode, it is limited by a seperate timeout. | | DebugEnabled (DWORD), default 0. | When set to 1, a log file will be created in the root directory called | torchbutton.txt. Include this file if there are issues. | | History: | | v2.3 (2009-12-08) | - Fix icons not showing in HTC Sense or WM 6.5 start menu when installed to Storage Card. | | v2.2 (2009-12-02) | - New icons for all TorchButton apps (thanks tnyynt!). These only work in WM6.5 and up. | Older OS's will still see the old icons. | - Added registry setting to use bright setting in blink mode (see BlinkUsesBrightMode). | - Bright mode now has a seperate timeout, configurable in registry (see BrightModeTimeout). | - Added support for Samsung Omnia i9x0 devices (hopefully they all work). | Thanks to raph/zemrwhite2/PaSSoA (http://www.modaco.com/content-page/275325/camera-light-and-software/page/20/#entry936759). | Thanks to Chainfire for testing on his Omnia i900L. | | v2.1 (2009-11-14) | - Bright mode is now support on the HTC HD2 (Leo). | - Added a one-time warning message when bright mode is used for the first time. | | v2.0 (2009-11-07) | - Added support for the HTC HD2 (Leo). Bright mode does not work on this device. Maybe later... | | v1.5 (2009-04-28) | - Added PTT (Push-To-Torch) mode. Probably only useful for devices that have the PTT button, | such as the AT&T Fuze. | - Added brightResetTimeInMs registry setting for owners of the Alltel Touch Pro. They need to | set this value to 100 for bright mode to work properly. | | v1.4 (2008-11-29) | - Fixed 'sos' mode. It now properly uses a single configurable unit time to calculate | other intervals. | - Updated 'sos' mode. You can now configure a text to be sent via morse code in the | registry. Check configuration part of the readme for more info. | - Removed old 'sos' registry settings and replaced them with new ones. | - Increased default flashlight timeout from 30 to 60 seconds. | - Changed default 'blink' time to 250ms for both on and off. | | v1.3 (2008-11-13) | - Added 'blink' feature. Registry configuration options: | - blinkTimeOnInMs (DWORD), default 500. Configures the time the LED is on. | - blinkTimeOffInMs (DWORD), default 500. Configures the time the LED is off. | - Added 'SOS' feature. More like a 'morse code' feature though. You can set any | morse code to be signalled in the registry. Options: | - sosCode (SZ), default " ...---...". Configures the morse code to signal. | - sosDotTimeoutInMs (DWORD), default 200. Configures 200ms LED on, and 200ms LED off for ".". | - sosDashTimeoutInMs (DWORD), default 400. Configures 400ms LED on, and 400ms LED off for "-". | - sosSpaceTimeoutInMs (DWORD), default 1000. Configures 1000ms pause when processing space " ". | - New shortcuts are added for those features. | | v1.2 (2008-11-09) | - Enlarged maximum timeout override from 300 seconds to 86400 seconds (a day). | - Added 'bright' feature. Note that the light may flicker almost unnoticably | every 750ms, can't help that. :) | | v1.1 (2008-09-01) | - Added ability to override default timeout value (in seconds) stored in | HKLM\Software\TorchButton\FlashlightTimeout (DWORD). | | v1.0 (2008-08-31) | - Initial version | }------------------------------- | | Author: Martijn Stolk | Website: www.netripper.nl | XDA thread: http://forum.xda-developers.com/showthread.php?p=4943210 | ------------------ |
|
||||||||
|
||
|
||
| ||
|
||
|
||
|
||
| ||
|
||
|
||
|
||
| ||
|
||
|
||
|
||
| ||
|
||
|
||
|
||
| ||
|
||
|
||
|
||
| ||
|
|
|||||
|
|
