사용법
1. 외장메모리 제외한 곳에 설치 (이유 : 외장메모리를 사용해야되기때문)한 후 실행
2. 드랍다운리스트(?)에서 SD Memory Card를 선택
3. 왼쪽 하단에 Activate를 클릭 ---> usb메모리로 인식됨
4. Deactivate클릭 하면 원래되로 돌아옵니다..
본인은 M4650인데 이것 설치후 SD카드를 뺄필요없이 그냥 외장 메모리처럼 씁니다.
2.0인식율이네요 ..
WM5torage v1.8
This program will export the flash memory card inside the smartphone as usual USB Mass Storage device (ordinary “usb disk”) - effectively turning smartphone into flash reader. Take note that speed will be dependent on your PDA/smartphone hardware - it will be high-speed USB only if your device actually high-speed capable (most are not), and also most devices have quite slow flash writers. Some devices with proper hardware support perform in spectacular speed though (for example HTC Athena works in high USB 2 speed if you export a microdrive).
WM5torage could work with different phones and PDAs, hovewer I cant be sure about compatibility with every device ever made, as I had to break some specifications to defuse “anomalies” (bugs?) in the firmware USB drivers. This just means what it means - some devices/firmwares have problems with WM5torage, and on some it won’t work at all (notably on Typhoon/Feeler/C500/8010/8020 with “unofficial” WM5).
When activated, memory card must be made not be accessible to the smartphone, as all direct access to the flash card will be routed to USB. Take note that if some currently running programs have files open from the storage card, that can prevent Mass Storage from activation (”error 1f”). In that case, try to close all running programs (soft reset is needed sometimes).
Windows Mobile 5 is required. Sorry, but I cant possibly make it work on WM 2003, as only WM5 allows USB protocol implementation separate from USB hardware driver - on WM 2003 Ill have to rewrite whole USB hardware drivers, and of course its not feasible.
If you want to uninstall it, I strongly recommend to de-activate mass storage mode first.
Of course, you will also need full application unlock. Take note that some recipies do not do full unlock, they still leave some API locked. People who getting “error 57″ most likely havent fully unlocked their smartphones. Try this one:
to HKLMSecurityPoliciesPolicies
add new value “0000101b”: dword = 1
That would set security model to “one-tier” - unsigned applications/components will still ask for confirmation, but after you confirm, they will launch in full-trust access mode, like on WM5 PocketPCs.
Size: 37 KB
Date: December 5, 2007 (Updated)
Type: Freeware
Requirements: Windows Mobile 5.0
추천:Jeff
평가:초보햏
